<-- Back to main products page


   Page: 1 2 3 Next

  Integrated Engineering IE Billet Press Fit Timing Belt Drive Gear for 1.8T/2.0T FSI EnginesIEBEVC8
Eliminate the concern of shearing your 2.0T FSI or 1.8T timing drive gear keyway once-and-for-all with this billet replacement. The factory gears are notorious for coming loose in high RPM conditions, leading to the keyways completely breaking, causing timing belt failure. With this product,Integrated Engineering completely redesigned the factory interface, removing the weak factory gear and loose-fitting keyway, replacing it with a solid steel gear with a press-fit interface.GSP Price:
$199.99

More Info..

  Integrated Engineering IE Adjustable Camber Plates for MK5/MK6/8P/8J Chassis
Integrated Engineering camber plates excell when ensuring that the tire's contact patch is flat on the pavement under hard cornering. This is essential to maximizing grip levels dialing in the required amount of negative camber (leaning the tire in) for your specific tire and suspension combination. Higher grip levels cause further body roll and suspension deflection and this requires more camber. These Integrated Engineering camber plates allow maximum adjustability of camber. They also provide a stable foundation for your front suspension by replacing the compliant rubber OEM mounts with a steel bearing, eliminating unwanted movement under heavy loads.GSP Price:
$499.99

More Info..

  Integrated Engineering IE 2.5L 5 Cylinder Manifold Power Kit
Bring your 2.5L 5 cylinder VW engine to life with the Integrated Engineering cast intake manifold. By allowing your engine to breathe the way that it naturally wants to, this piece will allow for great gains over the factory intake manifold, extending the powerband further into the RPM range. Integrated Engineering has carefully engineered and tested this intake manifold in house to get the best results possible in any condition. This unit is designed and manufactured completely in the United states, utilizing a special self aging, self hardening alloy with especially strict requirements for chemical composition. GSP Price:
$1499.99

More Info..

  Integrated Engineering Valve Cover Breather Adapter 2.0T FSI call to get yours installed to day!
Integrated Engineering has a solution for the PCV valve that commonly fails on the 2.0T FSI engines. These beautiful billet pieces are a direct replacement for the faulty plastic pieces that cause rough idle, check engine lights, power loss and decreased fuel economy. This will eliminate the factory PCV valve.This adapter comes pre assembled with the required barb to clip the factory block breather hose to. Unlike other pieces available, ours maintains the two breather outlets for proper crankcase ventilation. These can easily be plumbed to a catch can to collect the oil mist that is emitted. Just like many of our other products, these are made in house at IE on our CNC lathe and mill. GSP Price:
$99.99

More Info..

  Integrated Engineering Mahle PowerPack 83MM Bore 9:1 CR 2.0T FSI Piston Set MAH-FSI-CONF
This is a set of extremely high quality Mahle PowerPack pistons for the 2.0T FSI engine. Mahle Powerpack pistons are extremely high quality pieces which provide improvements in strength over OEM pistons without some of the sacrifices sometimes found in other forged pistons. Mahle Powerpack pistons are precision forged from 2618 alloy, which makes for a very strong piston. They all feature forged side reliefs, reducing the weight of the overall package. They also use slipper skirt designs, reducing friction and further reducing weight. Mahle PowerPack pistons feature ultra flat ring grooves, which promote excellent ring seal and most importantly reduce the chances of micro-welding during brea...GSP Price:
$749.99

More Info..

  Integrated Engineering Mahle PowerPack 83.5MM Bore 9:1 CR 2.0T FSI Piston SetMAH-FSI-CONF
This is a set of extremely high quality Mahle PowerPack pistons for the 2.0T FSI engine. Mahle Powerpack pistons are extremely high quality pieces which provide improvements in strength over OEM pistons without some of the sacrifices sometimes found in other forged pistons. Mahle Powerpack pistons are precision forged from 2618 alloy, which makes for a very strong piston. They all feature forged side reliefs, reducing the weight of the overall package. They also use slipper skirt designs, reducing friction and further reducing weight. Mahle PowerPack pistons feature ultra flat ring grooves, which promote excellent ring seal and most importantly reduce the chances of micro-welding during brea...GSP Price:
$749.99

More Info..

  Integrated Engineering Mahle 1.8T 20V Stroker Piston SetMAH-PVA1
This is a set of extremely high quality Mahle PowerPack pistons for the 1.8t 20v engine. Mahle Powerpack pistons are extremely high quality pieces which provide improvements in strength over OEM pistons without some of the sacrifices sometimes found in other forged pistons. Mahle Powerpack pistons are precision forged from 4032 alloy, a low expansion rate aluminum. They all feature forged side reliefs, reducing the weight of the overall package. They also use slipper skirt designs, reducing friction and further reducing weight. Mahle PowerPack pistons feature ultra flat ring grooves, which promote excellent ring seal and most importantly reduce the chances of micro-welding during break in. E...GSP Price:
$849.99

More Info..

  Integrated Engineering Mahle 1.8T 20V Piston Set: 81MM Bore, 8.5:1 CR, Stock StrokeMAH-FSI-CONF
This is a set of extremely high quality Mahle PowerPack pistons for the 1.8t 20v engine. Mahle Powerpack pistons are extremely high quality pieces which provide improvements in strength over OEM pistons without some of the sacrifices sometimes found in other forged pistons. Mahle Powerpack pistons are precision forged from 4032 alloy, a low expenasion rate aluminum. They all feature forged side reliefs, reducing the weight of the overall package. They also use slipper skirt designs, reducing friction and further reducing weight. Mahle PowerPack pistons feature ultra flat ring grooves, which promote excellent ring seal and most importantly reduce the chances of micro-welding during break in. ...GSP Price:
$749.99

More Info..

  Integrated Engineering Forged 144X20 Rods 1.8T, FSI, Stroker, 16V, early 8V Audi VW IERHVA1-CONF
Integrated Engineering is proud to manufacture the highest quality connecting rods available for European applications, at a reasonable price. This is accomplished through careful design, manufacturing, and quality control processes. With hundreds and hundreds of sets of VW and Audi connecting rods in stock, we are your specialist supplier with the inventory and knowledge to make your project a success. One of the hallmarks of a high quality connecting rod is its strength to weight ratio. Anyone can create an extremely strong rod out of a huge chunk of steel. Creating one with a reasonable weight that works well in today's high rpm european applications, and holds up to a lifetim...GSP Price:
$499.99

More Info..

  Integrated Engineering Crankshaft Girdle Kit for VW/Audi 2.0T FSI Engines IEBEVA13
Under high RPM and power use your block can begin to flex, causing severe main bearing wear or even a broken crank. Reinforcing the block is a necessity for these extreme applications. This girdle kit uses a 3/8" steel plate to bolt on the underside of your block to reinforce it and prevent from flexing under high power use. The girdle plate bolts to all of the main journals, using the supplied extended-length ARP main stud kit. It is then sandwiched between the block and the oil pan to keep the block from flexing. This kit includes all lengthened hardware needed to install the girdle plate. Spacers are included for use with factory main caps, but IE "Tall Boy" billet main caps are a highly ...GSP Price:
$999.99

More Info..

   Page: 1 2 3 Next